幸运彩app

Position: Home > 幸运彩app下载官网 > Engineering (porous) ceramic testing instrument
Related Articles / RELATED ARTICLES
    幸运彩app下载官网
    • 简介:仪器适合GB6569-2006《精细工程陶瓷弯曲强度试验方法》,GB/T1965《多孔陶瓷弯曲强度试验方法》适用于作机械部件、结构材料等高强度工程陶瓷在室温下三点、四点弯曲强度的测定。 Name: Digital display engineering material (compressive and flexural) strength comprehensive tester (new) Brief introduction: The instrument is suitable for GB6569-2006 "Fine Engineering Ceramics Bending Strength Test Method", GB / T1965 "Porous Ceramics Bending Strength Test Method" is applicable to It is used to measure the three-point and four-point bending strength of high-strength engineering ceramics such as mechanical parts and structural materials at room temperature. It is suitable for GB8489 "Test method of compressive strength of engineering ceramics" and GB / T1964 "Test method of compressive strength of porous ceramics". It is suitable for measuring the compressive strength of high-strength engineering ceramics such as mechanical parts and structural materials at room temperature.

    • 简介:适合与国标GB/T25994-2010《蜂窝陶瓷》,用于工业陶瓷成品等静压强度的检测。 Name: Brief introduction of JYY engineering ceramic isostatic strength tester : suitable for the national standard GB / T25994-2010 "Honeycomb ceramics", used to test the isostatic strength of industrial ceramic products.

    • 简介:仪器适合GB6569-2006《精细工程陶瓷弯曲强度试验方法》,GB/T1965《多孔陶瓷弯曲强度试验方法》适用于作机械部件、结构材料等高强度工程陶瓷在室温下三点、四点弯曲强度的测定。 Name: SGW Digital Display Engineering Materials (Compression and Bending) Strength Comprehensive Tester Introduction: The instrument is suitable for GB6569-2006 "Fine Engineering Ceramics Bending Strength Test Method", GB / T1965 "Porous Ceramics Bending Strength Test Method" is suitable for machinery Measurement of three-point and four-point bending strength of high-strength engineering ceramics such as parts and structural materials at room temperature. It is suitable for GB8489 "Test method of compressive strength of engineering ceramics" and GB / T1964 "Test method of compressive strength of porous ceramics". It is suitable for measuring the compressive strength of high-strength engineering ceramics such as mechanical parts and structural materials at room temperature.

    • 简介:器适合GB6569-2006《精细工程陶瓷弯曲强度试验方法》,GB/T1965《多孔陶瓷弯曲强度试验方法》适用于作机械部件、结构材料等高强度工程陶瓷在室温下三点、四点弯曲强度的测定。 Name: SGW-II Intelligent Compressive Strength Tester (Intelligent Compression Strength Tester) Brief introduction: Applicable to GB6569-2006 "Fine Engineering Ceramics Bending Strength Test Method", GB / T1965 "Porous Ceramics Bending Strength Test Method" applicable It is used to measure the three-point and four-point bending strength of high-strength engineering ceramics such as mechanical parts and structural materials at room temperature. It is suitable for GB8489 "Test method of compressive strength of engineering ceramics" and GB / T1964 "Test method of compressive strength of porous ceramics". It is suitable for measuring the compressive strength of high-strength engineering ceramics such as mechanical parts and structural materials at room temperature. This machine adopts servo motor control, which has the advantages of small size, low noise, no oil leakage, and precise control. Replacing the pressure tool This instrument is also suitable for the above standards, and realizes one machine for multiple uses. Suitable for bending, bending and compression test of various materials.

    • 简介:仪器参照标准:GB5594.2,GB/T 3074.2,GB/T3074.2-2008《石墨电极弹性模量测定方法》GB/T5594杨氏弹性模量泊松比测试方法以及GB/T 2105,GB10700等。 Name: Dynamic Elastic Modulus Tester Introduction: Instrument Reference Standards: GB5594.2, GB / T 3074.2, GB / T3074.2-2008 "Method for Measuring the Elastic Modulus of Graphite Electrodes" GB / T5594 Young's Modulus Poisson's Ratio Test methods and GB / T 2105, GB10700, etc.

    • 简介:适用于强度较小的非金属材料的抗压强度检测,也满足标准:HG/T2783-1996分子筛抗压碎力试验方法,HG/T3927-2007工业活性氧化铝中抗压强度的测定。 Name: Introduction to SKZ-500 particle strength tester : suitable for compressive strength testing of non-metallic materials with small strength, which also meets the standards: HG / T2783-1996 molecular sieve crushing force test method, HG / T3927-2007 industrial activity Determination of compressive strength in alumina.

    • 简介:该仪器主要用来判断所显示的蜂窝陶瓷是否孔道变形或堵孔。 Name: TGY Honeycomb Ceramic Transmittance Tester Introduction: This instrument is mainly used to judge whether the displayed honeycomb ceramics have deformed channels or blocked holes. Low production cost, clear imaging, easy to operate, suitable for industrial or laboratory ceramic products inspection.

    • 简介: DKZ多孔陶瓷孔道直径测定仪适用于按GB/T1967-1996《多孔陶瓷孔道直径试验方法》测定多孔陶瓷毛细孔管道最大值。 Name: Introduction to Porous Ceramic Channel Diameter Tester : DKZ Porous Ceramic Channel Diameter Tester is suitable for measuring the maximum value of porous ceramic capillary pore pipes according to GB / T1967-1996 "Porous Ceramic Channel Diameter Test Method". This instrument is mainly composed of a gas supply bottle, an electrical control box and a sample holder. It adopts a precision low-range digital pressure measuring system to accurately measure the test pressure value. The test gas is compressed air or nitrogen; the sample holder is suitable for samples with a cylindrical cross-section. The holder ensures that the gas can only pass through the capillary pores of the sample during the test and does not leak from the edge of the sample.

    • 简介: DTQ多孔陶瓷透气度测试仪满足GB1968多孔陶瓷制品透气度的测定,多孔陶瓷制品的透气度是指室温下,在压力差为1毫米水柱时1小时内以层流状态通过厚为1厘米,面积为1米2的多孔陶瓷制品的空气立方米数。 Name: Brief introduction of porous ceramic air permeability tester : DTQ porous ceramic air permeability tester meets the GB1968 determination of porous ceramic products. The permeability of porous ceramic products refers to the temperature within 1 hour at room temperature under a pressure difference of 1 mm water column. The laminar flow passes through the air cubic meters of porous ceramic products with a thickness of 1 cm and an area of 1 m 2.

    • 简介:工程陶瓷(多孔陶瓷)成品侧面进行耐压自动测试的专用检测设备。 Name: DJY Engineering Ceramic Finished Product Isostatic Pressure Automatic Testing Device Introduction: A special testing equipment for automatic pressure test on the side of the finished product of engineering ceramics (porous ceramics).

    • 简介: Name: Brief introduction of porous ceramic permeability tester :

    • 简介:该仪器系采用真空法对多孔陶瓷制品、耐火材料的显气孔率、容重进行测定的仪器。 Name: Porous ceramic apparent porosity bulk density tester Introduction: This instrument is an instrument for measuring the apparent porosity and bulk density of porous ceramic products and refractory materials by using the vacuum method. Meet the standard GB / T1966 "Porosity ceramics apparent porosity, bulk density test method", GB / T2997 "Dense shaped refractory bulk density, apparent porosity and true porosity test method." The instrument adopts vacuum method to measure the apparent gas ratio and bulk density of materials.

    • 简介:本仪器适用GB1965《多孔陶瓷抗弯强度试验方法》,适合GB6569-2006《精细陶瓷弯曲强度试验方法》,用于测定多孔陶瓷制品的在室温下的抗弯强度的专业仪器。 Name: Digital ceramic bending strength tester Introduction: This instrument is applicable to GB1965 "Test method for flexural strength of porous ceramics" and GB6569-2006 "Test method for flexural strength of fine ceramics". It is used to determine the resistance of porous ceramic products at room temperature. Professional instrument for flexural strength.

    • 简介:本仪器满足GB/10700—2006“精细陶瓷弹性模量试验方法-弯曲法”,以及YS/T63.14-2006《铝用炭素材料检测方法,第13部分杨氏模量的测定-静测法》,适用于工程陶瓷、精细陶瓷、铝用炭素材料在室温下的静态弹性模量的测定。 Name: Brief introduction of material elastic modulus tester : This instrument meets GB / 10700-2006 "Fine ceramics elastic modulus test method-bending method", and YS / T63.14-2006 "Test method for carbon materials for aluminum, Part 13" Determination of Young's Modulus-Static Measurement Method ", applicable to the determination of the static elastic modulus of carbon materials for engineering ceramics, fine ceramics and aluminum at room temperature.

    contact details

    Email: 130732189@qq.com
    Address: No. 168, Xiaotang Middle Road, German Industrial Park, National High-tech Zone (Yuetang District), Xiangtan City, Hunan Province
    Follow us on WeChat Scan:
    online service Contact information QR code

    Consulting online customer service

    Service Hotline

    0731-58534888,13607322318

    Scan and follow us