幸运彩app

Position: Home > 幸运彩app下载官网 > Ceramic and building material testing instruments
幸运彩app下载官网
  • 简介: CKZ智能陶瓷砖断裂模数测定仪(抗折仪)采用先进的伺服电机调速加荷机构与触摸屏微电脑控制、计算、显示。 Name: CKZ-10000 Intelligent Ceramic Tile Fracture Modulus Detector (Folding Apparatus) Introduction: CKZ Intelligent Ceramic Tile Fracture Modulus Detector (Folding Apparatus) uses advanced servo motor speed regulation loading mechanism and touch screen microcomputer control and calculation. ,display. Meet GB / T3810.4-2016 / ISO10545-4: 2014 "Test method of ceramic tiles-Determination of fracture modulus and failure strength".

  • 简介:本仪器是用于测量无机材料、混合料和陶瓷原料烧结点温度、耐火度,它可使试验者在镜屏上清晰地看到试样在高温情况下,材料试样的体积收缩、膨胀纯化及完全球化,烧结,软化点,球状点,半球状点,熔化点等情况并得知各种情况发生时的相应温度。 Name: SJY image type sintering point tester (high temperature physical property meter, high temperature microscope) Introduction: This instrument is used to measure the temperature and fire resistance of sintering points of inorganic materials, mixtures and ceramic raw materials. It can make testers clear on the mirror See the sample at high temperature, the volume shrinkage, expansion and purification of the material sample and globalization, sintering, softening point, spherical point, hemispherical point, melting point, etc. temperature.

  • 简介: SKZ—10000A型数显陶瓷砖抗折仪采用电动液压加荷机构和采用多组弹簧实现匀速加荷。 Name: SKZ digital display ceramic tile breaking modulus and breaking strength tester, ceramic tile anti-folding instrument Introduction: SKZ—10000A digital display ceramic tile anti-folding instrument uses electric hydraulic loading mechanism and adopts multiple sets of springs to achieve uniform speed loading. Meet the GB / T3810.4-2016 ceramic tiles-determination of fracture modulus and failure strength

  • 简介:符合GB/T3810.6—2016《无釉砖耐磨深度的测定》及ISO10545-6—1995《无釉砖耐深度磨损试验方法》,GB/T12988-2009《无机地面材料耐磨试验方法》对试验仪器的要求。 Name: WM Ceramic Unglazed Brick Abrasion Tester, Steel Wheel Abrasion Tester, Inorganic (Pavement) Material Abrasion Tester Introduction: Meet GB / T3810.6—2016 "Determination of Abrasion Resistance of Unglazed Bricks" and ISO10545-6—1995 "Test method for deep abrasion resistance of unglazed bricks", GB / T12988-2009 "Test method for abrasion resistance of inorganic floor materials" on test equipment.

  • 简介: TXY型数显式陶瓷吸水率测定仪满足中华人民共和国国家标准GB/T3810.3-2016“建筑卫生陶瓷吸水率测定方法”也满足GB3299-82“日用陶瓷吸水率测定方法”的测定条件。 Name: TXY digital display ceramic water absorption tester Introduction: TXY digital display ceramic water absorption tester meets the national standard of the People's Republic of China GB / T3810.3-2016 "Determination method of building sanitary ceramic water absorption rate" also meets GB3299-82 Measurement conditions of "method for measuring water absorption of ceramics for daily use".

  • 简介: TKL陶瓷砖釉面抗龟裂试验仪其性能符合国家标准GB/T3810.11-2016/ISO10545-11:1994《陶瓷砖釉面抗龟裂试验方法》对试验设备的要求,也适用轻工行标QB/T4253-2011日用陶瓷抗釉裂测定方法。 Name: TKL ceramic tile glazed crack resistance tester (autoclave) Brief introduction: TKL ceramic tile glazed crack resistance tester has performance in accordance with national standards GB / T3810.11-2016 / ISO10545-11: 1994 "Ceramic tiles The requirements for test equipment for anti-cracking test of glaze surface "also apply to the test method for anti-glare cracking of ceramics for daily use of light industry standard QB / T4253-2011.

  • 简介:本产品符合:GB/T3810.2-2016《陶瓷砖-尺寸和表面质量的检验》的要求。 Name: TZY Ceramic Flatness, Right Angle, Edge Straightness Comprehensive Tester Introduction: This product meets the requirements of: GB / T3810.2-2016 "Ceramic Tiles-Inspection of Dimensions and Surface Quality". It is an ideal testing instrument for ceramic tile manufacturers and quality inspection departments.

  • 简介:适用于测量陶瓷砖抗热震性的专用设备,仪器符合GB/3810.9-2016陶瓷砖抗热震性测定的要求,根据陶瓷砖吸水率大小,可采用浸入法与非浸入法的试验方式。 Name: SQ006 Automatic Ceramic Tile Thermal Shock Detector Introduction: Special equipment suitable for measuring the thermal shock resistance of ceramic tiles, the instrument meets the requirements of GB / 3810.9-2016 ceramic tile thermal shock resistance measurement, according to the water absorption rate of ceramic tiles The size can be tested by immersion method and non-immersion method.

  • 简介: SKZ数显式砖瓦抗折仪采用直流电机调速加荷机构。 Name: SKZ Digital Display Brick and Tile Bending Apparatus Introduction: SKZ Digital Display Brick and Tile Bending Apparatus uses a DC motor speed regulating and loading mechanism. Meet the GB / T 21149-2007 "sintered tile" test standard.

  • 简介:本仪器适用广场砖,路面砖,生态砖等其他砖瓦制品的抗折强度,抗压强度之用。 Name: Digital Display Pavement Brick / Square Brick Flexural Strength Tester Introduction: This instrument is suitable for the flexural strength and compressive strength of square bricks, pavement bricks, ecological bricks and other brick and tile products. Change the press tool to achieve multiple functions in one machine.

  • 简介:该仪器适用GB/T3810.7-2016《陶瓷有釉砖表面耐磨性测定》标准。 Name: LM-8 Ceramic Tile Glaze Abrasion Resistance Tester Introduction: This instrument is applicable to GB / T3810.7-2016 "Ceramic Glazed Tile Surface Abrasion Resistance Test" standard.

  • 简介:完全适用GB/T3810.7-2016《陶瓷有釉砖表面耐磨性测定》标准而设计制作的仪器。 Name: LM-3, LM-4 ceramic tile glazed abrasion resistance tester Introduction: Apparatus designed and manufactured in full compliance with the GB / T3810.7-2016 "ceramic glazed tile surface abrasion resistance" standard. A certain amount of abrasive is placed on the glazed surface of the ceramic tile, the abrasive is ground on the glazed surface, and the difference classification of the glazed surface of the ground sample is visually compared.

  • 简介: SQ005全自动日用陶瓷抗热震性测定仪(热稳定性仪)满足GB3298-2008日用陶瓷器热震性测定方法试验对仪器的要求;也可用于玻璃及其它硅酸制品抗热震性,热稳定性测试。 Name: SQ005 Full-Automatic Daily Ceramic Thermal Shock Resistance Tester (Thermal Stability Tester) Introduction: SQ005 Full-Automatic Daily Ceramic Thermal Shock Resistance Tester (Thermal Stability Tester) Meets GB3298-2008 Daily Ceramics Thermal Shock The test method requires the instrument; it can also be used to test the thermal shock resistance and thermal stability of glass and other silicic acid products.

  • 简介: KS-B型数显可塑性测定仪是用于测量陶瓷泥料可塑性的一种新型仪器。 Name: KS-B Digital Display Plasticity Tester, Microcomputer Plasticity Tester Introduction: KS-B Digital Display Plasticity Tester is a new type of instrument for measuring the plasticity of ceramic mud. It is suitable for the national light industry industry standard QB / T1322-2010 (method for determining plasticity index of ceramic mud).

  • 简介:符合GB/3810.12-2016陶瓷砖抗冻性测定的要求。 Name: SQ007 Fully Automatic Ceramic Tile Frost Resistance Tester (Full Automatic Freeze-Thaw Tester) Introduction: Meet the requirements of GB / 3810.12-2016 ceramic tile frost resistance measurement.

  • 简介:采用伺服电机传动系统,均匀加载,显示准确,重复性好,特适用陶瓷泥条、电瓷及其他材料的抗折、抗压强度的准确测量。 Name: DPK Digital Display Electric Folding Instrument (New Type) Introduction: Adopting servo motor drive system, uniform loading, accurate display, good repeatability, especially suitable for accurate flexural and compressive strength of ceramic clay bars, electric porcelain and other materials measuring.

  • 简介:本仪器符合GB/T3810.5-2016对陶瓷砖用测恢复系数确定砖的抗冲击性的测定。 Name: TCY Ceramic Tile Impact Tester, Ceramic Tile Recovery Coefficient Tester Introduction: This instrument complies with GB / T3810.5-2016 for the determination of the impact resistance of ceramic tiles by measuring the recovery coefficient of ceramic tiles.

  • 简介:该仪器适用GB/T4100-2016,采用静滑块法测定陶瓷砖的摩擦系数 Name: TMY Ceramic Tile Friction Coefficient Tester Introduction: This instrument is applicable to GB / T4100-2016. It uses the static slider method to measure the friction coefficient of ceramic tiles.

  • 简介:主要适用于国家标准GB/T19766-2005《天然大理石建筑板材》和国家标准GB/T19966。4-2001《天然饰面石材试验方法第4部份:耐磨试验方法》以及美国标准ASTMC241-90“Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic”, 符合上述标准中对天然花岗岩、天然大理石、石灰石、砂岩、板石和其他建筑装饰材料(如人造石、微晶玻璃等)进行耐磨性或耐磨度试验方法的规定要求。 Name: SM-4 Daorui Abrasion Tester (Stone Abrasion Tester) Introduction: Mainly applicable to national standard GB / T19766-2005 "natural marble building board" and national standard GB / T19966. 4-2001 "natural decoration Surface Stone Test Methods Part 4: Abrasion Resistance Test Method "and American Standard ASTMC241-90" Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic ", in accordance with the above standards for natural granite, natural marble, limestone, sandstone, Slab stone and other building decoration materials (such as artificial stone, glass-ceramic glass, etc.) for the abrasion resistance or abrasion resistance test method specified requirements.

  • 简介:适用于检测陶瓷砖的湿膨胀,根据国家标准GB/T3810.10-2016/ISO10545-10:1995《 陶瓷砖-湿膨胀的测定》设计制造。 Name: SPY Ceramic Tile Wet Expansion Tester Introduction: It is suitable for detecting the wet expansion of ceramic tiles. It is designed and manufactured according to the national standard GB / T3810.10-2016 / ISO10545-10: 1995 "Ceramic Tile-Determination of Wet Expansion".

  • 简介: PK(DPK)数显式坯料抗折仪用于测量日用陶瓷、建筑卫生陶瓷坯料的抗折强度。 Name: Introduction of DPK digital display electric billet bending instrument (new type) : PK (DPK) digital billet bending instrument is used to measure the flexural strength of ceramics for daily use and building sanitary ceramics.

  • 简介:本仪器适用陶瓷、涂料、化纤等化工原料的白度测定,也符合GB/T1503 日用陶瓷的白度测定 Name: Introduction to WD Full-automatic Whiteness Meter : This instrument is suitable for whiteness measurement of chemical raw materials such as ceramics, coatings, chemical fiber and so on. It also conforms to GB / T1503 whiteness measurement of ceramics for daily use.

  • 简介:柯尼卡美能达新一代经济型便携色差计CR-10 Plus作为CR-10的升级款,在原有轻便灵活、便于携带的基础上,更实现了与电脑的连接,可进一步扩展数据管理的范围, 满足了质检人员频繁快速的现场测量并给出即时结果,帮助企业实现高效的供应商与产品的质量控制。 Name: NR-10 Handheld Color Difference Meter Introduction: Konica Minolta's new generation of economical portable color difference meter CR-10 Plus is an upgrade of CR-10. It is based on the original lightness, flexibility, and portability. The connection of the computer can further expand the scope of data management, meet the frequent and fast on-site measurement by the quality inspection staff and give instant results, and help enterprises to achieve efficient quality control of suppliers and products.

  • 简介:适用于GB/T3810.-2016线性热膨胀的测定标准。 Name: XPY ceramic linear thermal expansion meter, stone linear thermal expansion meter Introduction: Applicable to GB / T3810.-2016 linear thermal expansion measurement standard. Provide testing methods for the quality inspection of ceramics and refractory products in the factory's technical inspection department and scientific research and teaching units.

  • 简介:参考标准:GB/T4742日用陶瓷冲击韧性测定方法、QB/T 1993-2012《陶瓷器抗冲击试验方法》以及美标ASTM C 368陶瓷器抗冲击实验方法。 Name: CJB Daily Ceramic Impact Tester Introduction: Reference Standard: GB / T4742 Daily Ceramic Impact Toughness Measurement Method, QB / T 1993-2012 "Ceramic Impact Test Method" and American Standard ASTM C 368 Ceramic Impact Test method.

  • 简介:主要用于测量普通量具无法测量的大尺寸陶瓷砖的厚度。 Name: CHD Ceramic Tile Thickness Measuring Instrument Introduction: It is mainly used to measure the thickness of large-sized ceramic tiles that cannot be measured by ordinary measuring tools.

  • 简介: Name: Brief Introduction of Moisture Analyzer :

  • 简介:该仪器采用CT-008微电脑测力控制仪和高精度拉力传感器组成测力系统,具有测力精度高,性能稳定,自动显示测试结果,可循环显示拉力和防滑系数值等特点。 Name: TMY floor stone anti-skid performance tester, anti-skid coefficient tester Introduction: This instrument uses CT-008 microcomputer force control instrument and high-precision tension sensor to form a force measurement system. It has high force accuracy, stable performance, and automatically displays test results. It can display the characteristics of pulling force and anti-slip coefficient in a cycle. It meets the requirements of JC / T1050-2007 floor stone anti-slip performance grade classification and test methods, and is an ideal equipment for measuring the anti-slip coefficient of ground stone.

  • 简介:该仪器适应于对透水路面砖和透水路面板的透水进行测定。 Name: TSY Pavement Brick Permeability Coefficient Tester Introduction: This instrument is suitable for measuring the water permeability of permeable pavement bricks and permeable road panels. It meets the national standard GB / T25993-2010 of the People's Republic of China "Appendix for permeable bricks: Test method for permeability coefficient of permeable pavement bricks and permeable panels", and also meets the requirements of standard JC / T 945-2005 "Permeability brick-test method for permeability coefficient". This instrument is used to determine the water permeability coefficient of a cylindrical sample. Its principle is the ability of the sample to penetrate the liquid under a certain water pressure.

  • 简介:该仪器适用于测定各种墙面砖、地面砖的平整度(中心弯曲度、边弯曲度、翘曲度)指标。 Name: TPY ceramic tile flatness measuring instrument (simple) Introduction: This instrument is suitable for measuring the flatness (center bending, edge bending, warpage) of various wall and floor tiles.

  • 简介:该仪器是对陶瓷、石材、涂料、纸张、塑料、金属等平面进行光泽度检测,满足GB/T3891建筑饰面材料镜向光泽度测定方法。 Name: KGZ-1C Intelligent Gloss Meter Introduction: This instrument is used to measure the gloss of ceramic, stone, coating, paper, plastic, metal and other planes, and it meets the GB / T3891 method for measuring the gloss of architectural finish materials.

  • 简介:本机采用大屏幕在LCD显示,能显示试验方法、试验力,试验时间等关键数据。 Name: HV-1000 Ceramic Hardness Tester Introduction: This machine uses a large screen to display on the LCD, which can display key data such as test method, test force, and test time. Coupled with a precision data encoder, you can directly measure the hardness of the product without manually entering the diagonal length. The included mini printer can conveniently record the measurement results. HVS-1000 Digital Micro Hardness Tester is the representative of high-end hardness tester. This model is a high-tech product of optical-mechanical integration. The machine has a novel shape, good reliability, operability and intuitiveness. It is a new micro Vickers and Knoop hardness test using precision mechanical technology and photoelectric technology. instrument. The machine uses computer software programming, optical measurement system. It can adjust the intensity of the measurement light source and can select the hold time.

  • 简介: PM型非金属材料致密度仪是用于测定非金属粉体成型坯体的致密度的专用仪器。 Name: Introduction to PM Density Meter (Penetrometer) : PM type non-metal material densitometer is a special instrument for measuring the density of non-metal powder compacts. The PM type densitometer is composed of a body, a loading and unloading mechanism, an indenter, a sample supporting table and its lowering mechanism, and an indentation depth measuring device. The indenter includes a variety of needle-shaped indenters, all made of stainless steel. Generally, the hardness of the non-metal material body is relatively low, so the test force used in the test is relatively small.

  • 简介:饰面砖粘结强度检测 Name: EQS-2000 Facing Brick Bonding Strength Detector Introduction: Facing Brick Bonding Strength Detection

  • 简介:该仪器是用于瓷胎、玻璃透光度检测的专用仪器 Name: Intelligent Transmitters for Porcelain Tires, Transmitters for Porcelain Billets

  • 简介:本仪器用于检测陶瓷制品装饰物(金属,花纸,釉面)的粘附力,耐磨度的仪器。 Name: Golden abrasion meter Introduction: This instrument is used to test the adhesion and abrasion resistance of ceramic products (metal, flower paper, glaze).

contact details

Email: 130732189@qq.com
Address: No. 168, Xiaotang Middle Road, German Industrial Park, National High-tech Zone (Yuetang District), Xiangtan City, Hunan Province
Follow us on WeChat Scan:
online service Contact information QR code

Consulting online customer service

Service Hotline

0731-58534888,13607322318

Scan and follow us